Where can i find a cable to run to my expansion chamber on my tippman a5?
I have the actual chamber but not a cable to run to it. Any ideas?
A local gunsmith or online auctions,.
How do you make the earthquake go off in the sealed chamber in pokemon ruby?
HELP! i have a wailord and a relicanth, i put wailord in front and relicanth in back, and i went to the back of the chamber! do i have to beat the elite four first? please help!
To be able to obtain Regis you first need to have a Wailord and a Relicanth
You need to have a pokémon that knows dig with you aswell. Now you go to Route 134, the one with the currents…come in from the east side and navigate them to the south west until you hit a bit of land thats capable of you diving into, once underwater follow the land through til you come to an inscription that looks like its in dots. Resurface there and you’ll be inside a cave, go up to the inscription and read it. Then use dig. Go into the room thats just been opened up
Here make Relicanth the 1st Pokémon in your team and Wailord the last, read the inscription at the end and the caves will be opened after an earthquake.
Regirock should be found in the sandstormy desert in Route 111. In the mountain, read the inscription and do the following: Go Right Twice, Down Twice and then use Strength and Regirock should appear. Its at Lv. 40 so be prepared
Regice, the second member of the Regi-trio, Ice Type…After doing the above mentioned events, fly as close to route 105 as possible, most likely to Muro Town. Surf North-west and you will encounter a cave similar to the one you found Regirock in. Enter it, this task is pretty simple, go to the middle of the wall with the ‘braille’ inscription in it and press A, wait for a little bit and a door should appear…this could take several minutes so be patient. Go in and Regice will be there. Once again, its at Lv. 40
Registeel, the final member of the Regi-trio, Steel Type…After doing the above mentioned events, fly to the town thats to the east of the Safari Zone. Go to the Safari Zone, but instead of entering go west until you discover a staircase, go up this staircase and you’ll enter another part of route 120 (where it’s raining), there will be another mountain. Go into this one and once again you’ll find an inscription, read it and head to the dead center of the room and use Fly. A Path to the next room should open, go into it and Registeel will be there waiting. Its at Lv. 40
Hope this helped
Mip
Do you need the expansion chamber for a response trigger on a 98 custom Tippman?
I have a 98 custom Tippman hooked up with a response trigger and an expansion chamber. Do I need the expansion chamber?
well the response trigger doesnt have to do with the expansion chamber as far as i know. the expansion chamber: co2 in a tank is gas and a liquid… when the liquid enters your gun it can damage the internals and mess up your velocity. the expansion chamber has the liquid go into an area of the gun and lets it become a gas before reaching the internals or anything
Who is removed from the chamber during the State of the Union Address?
Which person is removed (should something happen) from the chamber?
It’s a random pick every time. This time it was Shaun Donovan-Housing and Urban Development.
Clinton was in London, which doesn’t really count.
What is the difference between a bandpass that has larger vented chamber to a smaller venter chamber?
i ask this question becuase there are sites that suggest the vented chamber is larger than the sealed chamber and vice versa. what is the difference between the two.
lets more air out, but bandpass sucks they are only good for certain freqs, go ported
How come the disable vita chamber button in Bioshock isn’t coming up for me?
How come the disable vita chamber button in Bioshock isn’t coming up for me?
I downloaded the update and downloadable add on but it doesn’t come up under options help!!!!!
Also its come up before but now it doesn’t anymore.
Delete your data you have on bioshock (saves, DLC) then signout. Now if you can make another Xbox live account (has to be gold) and go and download the DLC for that account. After that go back to other account and disable vita chamber should be back. Or you can have one of your friends recover his/her gamertag and do this but remeber the other acount has to have NEVER playied Bioshock to work
What would you rather see shawn michaels do at elimination chamber?
this is what i think will happen at elimination chamber for Shawn Michaels. its probable
Shawn Michaels will either cost HHH a chance at the wwe title, Given them a chance to face each other at WM
Or
Shawn Michaels Will Disrupt taker’s match, ultimately giving them a chance to face off again, at WM 26
What would you rather see?
I personally want to see HBK vs Taker at Mania.
I actually wanted this to happen. I wanted Jericho to qualify for the Smackdown chamber and then HBK qualify for the Raw chamber match. Then HBK would make a deal with Jericho and have them switch places. So HBK goes to smackdown chamber match while Jericho goes to Raw (Because Jericho wants to stay on Raw and this would allow him to) chamber match. Then at the PPV. HBK wins the title in the smackdown chamber, forcing Taker to want a rematch at Mania for the title, and Jericho would win the Raw one, making the Edge vs Jericho match at Mania, while keeping Jericho on Raw.
But sadly, that dream died when Orton beated HBK in the qualifier match. So it will have to be HBK ruins Taker matches. I really wanted HBK and Taker to have a match at mania for the title, but everyone really wants Jericho to win so he and edge would have that match. Darn!!
What can cause a 1996 geo metro automatic to suck transmission fluid into the combustion chamber?
Car is sucking atf into the combustion chamber when cold. My understanding is the 96 geo metro lsi 1.3 automatic does not have a transmission vacuum modulator, so does anyone know what is causing this?
the only way that could happen is if there is a hole in the transmission cooler on the radiator and it,s getting mixed in with the anti-freeze and you have a head gasket leaking.
How would I calculate where the buried inspection chamber is from the details below?
Also -The co-ordinates of the inspection chamber.
– WCB and distance from station A
Buried
Chamber SW2
43.525m distance from chamber SW1 to SW2
27.810m distance from chamber SW3 to SW2
Inspection chamber SW1
140E
IL 42.300
CL 45.500
BC2
Inspection chamber SW3
191.625E
263.350N
IL 42.500
CL 46.000
Station A
120E, 260N
45,500
i’m not familiar with the terms IL and CL, here.
the E and N pairs look like latitude+longitude but usually N only goes as far as 90 degrees, if that were the case; so you want to find Cartesian co-ordinates with equal x-y scales, for as many of these as you can; then you can draw a to-scale map, showing points you know, and estimating those you don’t know.
extend circles around the points SW1 and SW3 with radii 43.525 and 27.810 respectively, making adjustments until things fit.
algebraically, it becomes a system of polynomial equations where circles intersect, so you might have expressions of the form (x-a)² + (y-b)² = R² to map each of the circles
How would I calculate where the buried inspection chamber is from the details below?
Also -The co-ordinates of the inspection chamber.
– WCB and distance from station A
Buried
Chamber SW2
43.525m distance from chamber SW1 to SW2
27.810m distance from chamber SW3 to SW2
Inspection chamber SW1
140E
IL 42.300
CL 45.500
BC2
Inspection chamber SW3
191.625E
263.350N
IL 42.500
CL 46.000
Station A
120E, 260N
45,500
i’m not familiar with the terms IL and CL, here.
the E and N pairs look like latitude+longitude but usually N only goes as far as 90 degrees, if that were the case; so you want to find Cartesian co-ordinates with equal x-y scales, for as many of these as you can; then you can draw a to-scale map, showing points you know, and estimating those you don’t know.
extend circles around the points SW1 and SW3 with radii 43.525 and 27.810 respectively, making adjustments until things fit.
algebraically, it becomes a system of polynomial equations where circles intersect, so you might have expressions of the form (x-a)² + (y-b)² = R² to map each of the circles